page_banner

The application of thermoelectric cooling modules,peltier elements in the field of gene amplification instruments

The PCR instrument, also known as the PCR gene amplification instrument or polymerase chain reaction nucleic acid amplification instrument, amplifies specific DNA through polymerase chain reaction to replicate genes, and is an instrument used to check for infectious diseases or for paternity testing. It is widely used in biological laboratories, so the circulation system for the temperature part of PCR instruments has very high requirements. The TEC module ,thermoelectric modules, thermoelectric cooling modules, peltier elements of Beijing Huimao Cooling Equipment Co., Ltd. can fully meet the application requirements of PCR instruments. The TEC1-12708T200HP thermoelectric module ,peltier device,TEC module produced by our company achieves rapid heating and cooling through half-bridge drive combined with NMOS drive to control the temperature and realize gene amplification. It has an extremely fast heating and cooling rate, with a rated operating temperature of 125℃ and a heating temperature up to 64℃. When the temperature at the hot end is 30℃, Qmax can reach 75.6W. Size: 40*40mm The maximum operating voltage is 15.2V, and it is equipped with a matching ACR module. In conclusion, Beijing Huimao Cooling Equipment Co.,Ltd. The TEC1-127 series thermoelectric cooling modules, peltier modules, TE moules can be applied in the temperature control section of PCR instruments and also in scenarios where heating and cooling functions are required

TEC1-12708T200HP  Specification

Hot side temperature is 30C,

Imax: 8 -8.5A,

Umax: 15.2V

Qmax:75.6W

Delta T max: 67 C

ACR:1.35-1.65  Ohm

Size: 40x40x3.5mm

Wire : 20AWG silicone wire

 

TEC1-39109T200HP Specification

Hot side temperature is 30 C,

Imax: 9A

Umax: 46V

Qmax:246.3W

ACR: 4±0.1Ω(Ta= 23 C)

Delta T max: 67 -69C

Size: 55x55x3.5-3.6mm


Post time: Jul-07-2025